• 传梦环保催化燃烧
  • 欢迎访问我们的网站,可以随时免费咨询我们QQ/微信:727659375
    传梦环保催化燃烧

    免费服务热线

    18353121279

    新闻资讯中心News Center

    咨询热线

    18353121279

    How to choose materials for catalytic combustion equipment?

    来源:传梦催化燃烧 整理发布   时间:2019-08-21

    How to choose materials for catalytic combustion equipment?
    Recently, ChuanMeng Environmental Protection found that some enterprises pay more attention to other factors besides treatment technology when purchasing and consulting catalytic combustion equipment, such as material quality, life, types of waste gas treated, and whether the key problems such as meeting the standard of waste gas can be solved. The following is a simple understanding of the material of catalytic combustion equipment.
    The materials of catalytic combustion equipment produced by our company are currently 3 kinds, galvanized sheet, 201 and 304 stainless steel. Other materials can also be customized. Now, the matters needing attention in choosing catalytic combustion equipment are simply explained with these three materials:
    Selection of Catalytic Combustion Equipment by Waste Gas Temperature
    We all know that when choosing catalytic combustion equipment, we need to decide according to the temperature of the exhaust gas. Different temperatures will have different choices of materials. For example, high temperature exhaust gas treatment, we suggest choosing 304 stainless steel catalytic combustion equipment, because the exhaust temperature and exhaust gas attributes will cause chemical reactions to the equipment. Corrosivity should be considered. Therefore, it is suggested that if the waste gas temperature is high, 304 stainless steel catalytic combustion equipment should be selected. The stainless steel material has low sensitivity to temperature and high temperature resistance of 800 C. So 304 stainless steel catalytic combustion equipment is suitable for treating corrosive waste gas in your enterprise. It needs good toughness, more stability and longer service life. Words.
    On the contrary, if the waste gas temperature treated by your enterprise is not high, the requirement of life or budget is slightly low, and acid and alkali resistant waste gas treatment is needed, it is suggested that 201 material be selected, the price is slightly lower than 304 stainless steel material, and the performance-price ratio is relatively good. It is a substitute material for 304 stainless steel.
    If your company has strict budgetary requirements and is a temporary transitional investment, it is suggested to choose catalytic combustion equipment made of galvanized sheet material. The relative price is much lower than that of 304 stainless steel catalytic combustion equipment and 201 catalytic combustion equipment, and the performance is slightly worse. The main reason lies in the cost of raw materials between them. There are great differences, and there are also differences in the cost of manual processing and time cost.


    Selection of Catalytic Combustion Equipment by Plate Thickness
    We all know that if the weight of a catalytic combustion equipment is lighter when it is installed by forklift truck after the production, then we can basically judge that the manufacturer has made hands and feet on the material or material thickness. As the saying goes, it is not solid or solid. Then we can imagine that the life of this catalytic combustion equipment will be severely reduced.
    Generally, the plate selection of catalytic combustion equipment is roughly checked by means of one-touch-two-look-three-measurement.
    If it can be easily depressed, then the quality of the equipment or the thickness of the plate is obviously not enough. We can imagine if the equipment runs for a long time, whether this kind of low-quality catalytic combustion equipment can withstand the impact of high temperature, high corrosion and high air volume. Obviously, two words are enough! Through our junior high school mechanics can also be easily judged, but often some customers are fooled by some company's gorgeous office decoration, exquisite website pages and luxurious promotional color pages. Speak to you, dear, be careful!
    Second, to open the door of catalytic combustion equipment, to see the thickness and sealing of the door; to see whether the internal plates of the whole catalytic combustion equipment are uniformly selected. Why look at these, that is because if the raw materials used are of low quality, not compact and uneven thickness, then a very obvious result is that the weaker areas are more prone to deformation and corrosion, deformation will increase resistance, which will have a great impact on the treatment effect. Seriously, it will lead to the distortion and scrap of catalytic combustion equipment, which will increase the cost of replacing your equipment. The original design life may be five years, and the result will be scrap in two years. This is one of the important reasons to consider the catalytic combustion equipment. I think your company does not want to get a temporary catalytic combustion equipment cheaply. I suggest that your company inspect the catalytic combustion equipment produced by our company to ensure the quality of sincerity, on the basis of which it can also be used for a long time, with uniform material selection and meticulous workmanship.
    Three measurements are one measuring length, width and height. Some bosses may say that this is not true. Because irresponsible production enterprises and jerry-building often happen, it is suggested that you carefully measure the page size of each catalytic combustion equipment component is the same. Second, the thickness of each assembly connector is uniform, otherwise it will affect the performance. The operation life of the equipment and the equipment are easy to deform. If the thickness and uniformity of solder joints are measured by three methods, the deformation and exhaust gas leakage of catalytic combustion equipment will not easily occur if the thickness of uniform solder joints is well connected.
    Through the above methods under the same material conditions, your company can easily judge the advantages and disadvantages of catalytic combustion equipment. In a word, there are reasons for being expensive and disadvantages of being cheap. I hope that your company will choose carefully and choose the catalytic combustion equipment with high quality and long running. Dream of environmental protection in this wish Shangqi!

    相关文章

    页面版权备注

    本文版权归 传梦催化燃烧  所有;本文共被查阅 108 次。
    当前页面链接:http://www.cuihuaranshao.com.cn/language/en/how-to-choose-materials-for-catalytic-combustion-equipment/
    未经授权,禁止任何站点镜像、采集、或复制本站内容,违者通过法律途径维权到底!
    <
    公共厕所除臭设备

    公共厕所除臭设备

    公共厕所除臭设备 一、公厕是城市正常运转所必需的基本公共服务设施,它对于维护城市环境卫生、保障市民健康具有重要作用,是城市形象和文明水平的反映。世界公厕组织负责人杰克•西姆有一句名言,“厕所是一个国...

    废气催化燃烧处理设备

    feiqicuihuaranshaochulishebei

    公共厕所除臭设备

    公共厕所除臭设备 一、公厕是城市正常运转所必需的基本公共服务设施,它对于维护城市环境卫生、保障市民健康具有重要作用,是城市形象和文明水平的反映。世界公厕组织负责人杰克•西姆有一句名言,“厕所是一个国...

    食品生产车间通风设备

    食品生产车间通风设备 随着食品加工企业卫生水平和生产设施水平得到了很大的提高,但是部分企业在重视卫生控制的况下忽视了通风换气,导致室内空气不新鲜或车间风流混乱,对员工个人健康和卫生持续控制造成一定...

    氨法脱硫是什么?

    氨法脱硫是什么? 氨法脱硫工艺皆是根据氨与SO2、水反应成脱硫产物的基本机理而进行的,主要有湿式氨法、电子束氨法、脉冲电晕氨法、简易氨法等。 1、电子束氨法(EBA法)与脉冲电晕氨法(PPCP法) 电子束氨...

    干法脱硫塔的工作原理

    干法脱硫塔的工作原理 说到干法脱硫塔坑大家都不太了解,一般工厂企业采用湿法脱硫塔的比较多一些,所以大家对干法脱硫 塔都不太了解,甚至有些人都不知道什么是干法脱硫塔,下面就随着小编来了解一些吧! 什...

    污水处理知识篇:高浓度废水处理之MBR膜设计要点

    污水处理知识篇:高浓度废水处理之MBR膜设计要点 北极星水处置网讯:作为高浓度废水处置工艺的MBR膜法此刻利用愈来愈普遍,以其稳固污水处置能力备受存眷,但其宏大的保护量也使良多利用者头疼;那末要想在利...

    城市垃圾焚烧厂渗沥液MBR处理单元中膜污染控制获突破

    城市垃圾焚烧厂渗沥液MBR处理单元中膜污染控制获突破 北极星节能环保网讯:近日,依靠北京林业年夜学扶植的“水体污染源节制手艺北京市复点尝试室”在城市垃圾燃烧厂垃圾渗沥液MBR(膜生物反映器工...

    膜生物反应器MBR工艺处理制药废水技术详解

    膜生物反应器MBR工艺处理制药废水技术详解 北极星水处置网讯:MBR又称膜生物反映器(MembraneBio-Reactor),是一种由活性污泥法与膜分手手艺相连系的新型水处置手艺,用超滤膜分手方式替换了传统活性污泥处置...

    有色金属冶炼高砷废水处理Ⅲ

    有色金属冶炼高砷废水处理Ⅲ 北极星环保网讯:氧化吸附同步手艺最近几年来,零价铁(Fe0)愈来愈被人们存眷。人们发觉Fe0在对As(Ⅲ)的往除进程中,包括了氧化和吸附两个感化,年夜年夜缩短了往除流程。研究表白,...

    平板膜MBR用于医院废水处理及回用研究

    平板膜MBR用于医院废水处理及回用研究 北极星水处置网讯:根据某省精力病病院废水量、水质特点,摘用MBR平板膜及响应工艺对废水进行有用处置,处置后污水到达回用水尺度,方案设计运行本钱约为:0.79元/m3。1...

    污水处理设备篇:中空纤维帘式与平板膜的比较

    污水处理设备篇:中空纤维帘式与平板膜的比较 北极星环保网讯:拔取两种分歧布局类型的膜组件进行化工废水处置的中试利用研究,对照研究了MBR膜系统的最好气水比,临界膜通量、膜系统的分手与处置效验和膜的...

    【实例】高浓度难生化金属表面处理废水处理改造工程

    【实例】高浓度难生化金属表面处理废水处理改造工程 北极星水处置网讯:某公司首要出产空调铜配件,与国表里首要空调企业似格力、美的、格兰仕、韩国LG等构成了持久合作火伴关系。公司车间除油、酸洗、抛光、...

    制药废水MBR处理技术

    制药废水MBR处理技术 北极星水处置网讯:今朝我国出产的经常使用药物达2000 种摆布,分歧种类的药物摘用的原先种类和数目各不不异,出产工艺及合成线路也存在差别,是以造成制药出产产业及废水的构成十分复杂...
    更多问题请点击>>
    About us

    传梦环保催化燃烧

    催化燃烧-催化燃烧设备-rco催化燃烧-催化燃烧装置

    Zouping Shuaike Painting Purification Equipment Co., Ltd. is a subsidiary of Guangzhou Jiuhua Machinery Equipment Co., Ltd. It specializes in the design and manufacture of environmental protection painting equipment. Its main products are UV photocatalysis, spray tower, swirl tower, activated carbon environmental protection box, water curtain cabinet, central dust removal, paint baking room ass...

    查看详情

    传梦环保催化燃烧废气处理设备

    公共厕所除臭设备

    公共厕所除臭设备

    公共厕所除臭设备 一、公厕是城市正常运转所必需的基本公共服务设施,它对于维护城市环境卫生、保障市民健康具有重要作用,是城市形象和文明水平的反映。世界公厕组织负责人杰克•西姆有一句名言,“厕所是一个国家竞争力的体现”。公厕环境的改善取决于国力的不断提升...

    食品生产车间通风设备

    食品生产车间通风设备

    食品生产车间通风设备 随着食品加工企业卫生水平和生产设施水平得到了很大的提高,但是部分企业在重视卫生控制的况下忽视了通风换气,导致室内空气不新鲜或车间风流混乱,对员工个人健康和卫生持续控制造成一定的影响。 一、通风换气的目的 在食品生产作业过程中...

    氨法脱硫是什么?

    氨法脱硫是什么?

    氨法脱硫是什么? 氨法脱硫工艺皆是根据氨与SO2、水反应成脱硫产物的基本机理而进行的,主要有湿式氨法、电子束氨法、脉冲电晕氨法、简易氨法等。 1、电子束氨法(EBA法)与脉冲电晕氨法(PPCP法) 电子束氨法与脉冲电晕氨法分别是用电子束和脉冲电晕照射喷入水...

    干法脱硫塔的工作原理

    干法脱硫塔的工作原理

    干法脱硫塔的工作原理 说到干法脱硫塔坑大家都不太了解,一般工厂企业采用湿法脱硫塔的比较多一些,所以大家对干法脱硫 塔都不太了解,甚至有些人都不知道什么是干法脱硫塔,下面就随着小编来了解一些吧! 什么是干法脱硫塔? 干法脱硫塔也算是玻璃钢脱硫塔其中的...

    污水处理知识篇:高浓度废水处理之MBR膜设计要点

    污水处理知识篇:高浓度废水处理之MBR膜设计要点

    污水处理知识篇:高浓度废水处理之MBR膜设计要点 北极星水处置网讯:作为高浓度废水处置工艺的MBR膜法此刻利用愈来愈普遍,以其稳固污水处置能力备受存眷,但其宏大的保护量也使良多利用者头疼;那末要想在利用中尽可能削减保护工作强度,在设计阶段就需要注重以...

    城市垃圾焚烧厂渗沥液MBR处理单元中膜污染控制获突破

    城市垃圾焚烧厂渗沥液MBR处理单元中膜污染控制获突破

    城市垃圾焚烧厂渗沥液MBR处理单元中膜污染控制获突破 北极星节能环保网讯:近日,依靠北京林业年夜学扶植的“水体污染源节制手艺北京市复点尝试室”在城市垃圾燃烧厂垃圾渗沥液MBR(膜生物反映器工艺手艺是膜分手手艺与生物手艺有机连系的新型废水处置...

    膜生物反应器MBR工艺处理制药废水技术详解

    膜生物反应器MBR工艺处理制药废水技术详解

    膜生物反应器MBR工艺处理制药废水技术详解 北极星水处置网讯:MBR又称膜生物反映器(MembraneBio-Reactor),是一种由活性污泥法与膜分手手艺相连系的新型水处置手艺,用超滤膜分手方式替换了传统活性污泥处置系统中的二沉池和砂滤系统。与很多传统的生物水处置工...

    有色金属冶炼高砷废水处理Ⅲ

    有色金属冶炼高砷废水处理Ⅲ

    有色金属冶炼高砷废水处理Ⅲ 北极星环保网讯:氧化吸附同步手艺最近几年来,零价铁(Fe0)愈来愈被人们存眷。人们发觉Fe0在对As(Ⅲ)的往除进程中,包括了氧化和吸附两个感化,年夜年夜缩短了往除流程。研究表白,在有氧前提下,Fe0颠末一系列反映,将As(Ⅲ)氧化成As(Ⅴ...

    平板膜MBR用于医院废水处理及回用研究

    平板膜MBR用于医院废水处理及回用研究

    平板膜MBR用于医院废水处理及回用研究 北极星水处置网讯:根据某省精力病病院废水量、水质特点,摘用MBR平板膜及响应工艺对废水进行有用处置,处置后污水到达回用水尺度,方案设计运行本钱约为:0.79元/m3。1 工程概况某精力病病院是一所精力、神经疾病专科病院...

    污水处理设备篇:中空纤维帘式与平板膜的比较

    污水处理设备篇:中空纤维帘式与平板膜的比较

    污水处理设备篇:中空纤维帘式与平板膜的比较 北极星环保网讯:拔取两种分歧布局类型的膜组件进行化工废水处置的中试利用研究,对照研究了MBR膜系统的最好气水比,临界膜通量、膜系统的分手与处置效验和膜的污染和清洗体例。中试成果表白,在该类废水处置中,中...

    【实例】高浓度难生化金属表面处理废水处理改造工程

    【实例】高浓度难生化金属表面处理废水处理改造工程

    【实例】高浓度难生化金属表面处理废水处理改造工程 北极星水处置网讯:某公司首要出产空调铜配件,与国表里首要空调企业似格力、美的、格兰仕、韩国LG等构成了持久合作火伴关系。公司车间除油、酸洗、抛光、钝化(不含铬)等工序排放的出产废水COD高达1 650 mg/L...

    制药废水MBR处理技术

    制药废水MBR处理技术

    制药废水MBR处理技术 北极星水处置网讯:今朝我国出产的经常使用药物达2000 种摆布,分歧种类的药物摘用的原先种类和数目各不不异,出产工艺及合成线路也存在差别,是以造成制药出产产业及废水的构成十分复杂。制药废水凡是属于难降解的高浓度废水,其特点是组分...

    碧水源坚守创新为魂 八次蝉联“水业十大影响力企业”

    碧水源坚守创新为魂 八次蝉联“水业十大影响力企业”

    碧水源坚守创新为魂 八次蝉联“水业十大影响力企业” 北极星水处置网讯:4月3日, 2018(第十六届)水业计谋论坛在京郑重举行,在该论坛的“将鼎新进行来底——回忆水业鼎新20年 瞻望将来成长”主题对话环节,高科技环保企业碧水源总司理戴日成...

    农村污水处理解决方案:小型立式MBR废水处理装置构思

    农村污水处理解决方案:小型立式MBR废水处理装置构思

    农村污水处理解决方案:小型立式MBR废水处理装置构思 北极星水处置网讯:此刻农村及分离地域的污水处置成为核心,由于年夜城市可以集中搜集,集中处置,可以包管低本钱和连续供水。但针对分离地域的污水处置,不成能进行集中处置,如许运行本钱高,并且运营保护...

    废水处理中MBR的设计注意事项

    废水处理中MBR的设计注意事项

    废水处理中MBR的设计注意事项 北极星水处置网讯:MBR膜法此刻废水处置中,利用愈来愈普遍,以其稳固清亮的出水备受存眷,但其宏大的保护量也使良多利用者头疼;那末要想在利用中尽可能削减保护工作强度,在设计阶段就需要注重以下几个题目:1、 该废水适不合适用M...

    国际权威专家西蒙·贾德教授论MBR:“效果好但成本高”的观点已被颠覆

    国际权威专家西蒙·贾德教授论MBR:“效果好但成本高”的观点已被颠覆

    国际权威专家西蒙·贾德教授论MBR:“效果好但成本高”的观点已被颠覆 北极星水处置网讯:西蒙˙贾德(Simon Judd)传授任职于英国的克兰菲尔德年夜学 (Cranfield University)、中东的卡塔尔年夜学(Qatar University),他具有跨越20年的关于水和废水处置手艺根基道...

    
    传梦环保催化燃烧
    品牌保障

    九华帅克
    老品牌,放心

    传梦环保催化燃烧
    质量可靠

    多年研发经验
    造就优@秀产品质量

    传梦环保催化燃烧
    增值税发@票

    所有产品均可开具增
    值专用发@票

    传梦环保催化燃烧
    产品售后支持

    产品技术支持
    7x24小时保障

       
    返回顶部
    keywords:催化燃烧设备